Auto Reboot - Printable Version +- Wight Support Forum (http://wightsupport.com/forum) +-- Forum: Wightsupport Forums (http://wightsupport.com/forum/forumdisplay.php?fid=1) +--- Forum: Draytek (http://wightsupport.com/forum/forumdisplay.php?fid=23) +---- Forum: Vigor 2860 (http://wightsupport.com/forum/forumdisplay.php?fid=24) +---- Thread: Auto Reboot (/showthread.php?tid=30)

Auto Reboot - wightsupport - 27-06-2018 The Draytek Vigor 2860 sometimes gets "hung" and requires a reboot. This can happen for many reasons but is invariably fixed by a reboot. Top avoid the issue, it is better set a weekly schedule to reboot the router. Go to Applications >> Schedule and click the index 1 (or next available) to set the configuration. - Check the Enable Schedule Setup state. - Set the Start Date and Start Time. This is when you want the first reboot to happen. - Set the Duration Time to zero only, otherwise the reboot function won't work. - As this is a reboot schedule, the Action and Idle Timeout will be ignored and can be left as is. - Check the Weekdays you want the reboot to occur. Sunday is best. - Press OK to save. Go to System Maintenance >> Reboot System >> Auto Reboot Time Schedule - The number in the box needs to relate to the index set in the schedule.